This vehicle was developed for mounting Caterpillar vehicles, such as tanks and armored motorcars, for long distance transportation, and protecting the Caterpillar vehicles during transport.
Wheel for the coupling trailer, and twin winch for mounting failed equipment onto a trailer
Double cabin that can accommodate 2 + 4 persons
Large winches with a hauling capability of 25 tons on the rear, the left, and the right of the cabin for hauling and mounting failed equipment onto a trailer.
Mounting commercial high-efficiency and high-horsepower engines onto vehicles for tracking capability, cold starting, and electromagnetic wave shielding adequate for military applications
Improves the convenience of operating the vehicle, and prevents the engine from shutting down and the vehicle from slipping when it is started on a slope.
The all wheel drive function is applied for improving tracking and hauling power, steering capability and stability, and off-road driving power.
Applying a full-air braking system to the vehicle for reducing the force required for pressing the pedal, and ensuring precise braking force.
Applying ABS for keeping the braking force and steering capability intact and securing vehicle stability on an uneven surface
Single- and double-axle steering for short rotation radius
This cap-over cabin provides improved legibility compared with bonnet-type, and cap-tilting function increases serviceability. Applying specifications of commercial vehicles enhances convenience of driving vehicle
Commercial vehicle instruments for improved legibility, and switches ergonomically arranged for enhanced operability
Fifth wheel of 20-ton capacity of vertical load on 3.5-in king pin (hauling load: 81.2 tons)
Type | KM1502 Tractor | |
---|---|---|
Overall length | mm | 9,070 |
Overall width | mm | 2,600 |
Overall height | mm | 3,470 |
GVW | kg | 18,800 |
Max. Speed | km/h | 90 |
Max. Horsepower | ps@rpm | 450@2,200 |
Max. Torque | kg·m@rpm | 190@1,400 |
Gradeability | % | 60 |
Fording Depth | mm | 760 |
Ground Clearance | mm | 340 |
Min. Turning Radius | m | 12.0 |
Range | km | 750 |
* All information is subject to change without notice according to any further improvements or operational environments.